Soft Touch™ (Stainless)
$48.00 – $78.00
The industry’s favorite Soft Touch Trigger Valve in stainless to handle more pressure.
- High quality Viton O-rings
- Deep Dish PTFE Disk
NOW it comes to you pre-assembled making it easier for you to install on your wand.
- Stainless nipple guaranteed not to break off behind the valve if wand is dropped.
- Built-in strainer. (A must for every wand)
- Yellow Jacket™ for a comfortable grip, no more bare metal
- Your choice of QD: Stainless male QD or Brass Female QD with choice of Cool Connect Color.
- Rated to 1,750 PSI @ 250˚F
Other Considerations:
- If you do not already have a proper mount, consider purchasing the Trigger Valve Hanger.
- If you live in a climate with freezing temperatures consider a Brass Hex Cap instead of Stainless.
The Soft Touch Trigger Valve is the only trigger valve you will ever need for all your wands.
I have been making wands as long as anybody in the business and the Soft Touch Trigger Valve is the ONLY trigger valve I use.
You won’t see me installing or recommending ANY other trigger valve. Period.
The Soft Touch Trigger Valve is that good.
Notice I make & sell the Soft Touch in every shape and form; far more than any other supplier.
I have sold literally thousands of these trigger valves to guys as an upgrade to the trigger valve on the wands they already own.
Once a guy tries it, he loves the easy pull and eventually he puts this same trigger valve on all of his wands.
Truly, this is the only trigger valve you need for any wand you may have.
The only problem you will have with this trigger valve is that it needs a new Rebuild kit once or twice a year.
A lot of guys don’t realize this and they will throw away the whole trigger.
Suppliers are famous for convincing you that you need to replace the whole valve when really all they need is an inexpensive rebuild kit.
Fact is, rarely do these valves go bad. I’ve seen guys get 10-12 years out of the same valve so it’s seldom the whole valve that’s bad.
It usually just needs an inexpensive rebuild kit. That’s it.
So just keep a couple of complete Rebuild kits on hand and a few Teflon Disks & Springs.
Then carefully follow the little video I made for you that shows you how to install them.
See Video
Trust me, there is a little trick to the installation you must follow to get a long life out of these parts.
So I make all these rebuild parts readily available and very inexpensive for you.
It’s the only trigger valve and the only rebuild kits you need for all your wands. The Soft Touch.
Please do not listen to other suppliers trying to sell you on their low quality trigger valves over and over and over.
These guys are con artists, plain & simple.
Just get the Soft Touch and stock up on rebuild parts and watch the video and you are set.
The Soft Touch Trigger Valve. It’s that good.
I reworked all the rebuild parts so they are the best they can be: High duromenter Viton and Deep Dish Disks.
| Strainer | Stainless, Brass |
|---|---|
| QD Disconnect | Brass Male, Stainless Male, Brass Female, Brass Female with Black Cool Connect, Brass Female with Blue Cool Connect, Brass Female with Green Cool Connect, Brass Female with Orange Cool Connect, Stainless Female, Stainless Female with Black Cool Connect, Stainless Female with Blue Cool Connect, Stainless Female with Green Cool Connect, Stainless Female with Orange Cool Connect |
Add a review
You must be logged in to post a review.
Related products
Wand Parts
Wand Parts
Wand Parts
Accessories
Hose Parts
Wand Parts
Wand Parts
Injection Sprayer Accessories
9 reviews for Soft Touch™ (Stainless)