New Product: Colorful Durable Rubber Grips. $10 ea
- WAND TUBE GRIP (2”, 1 3/4”, 1 1/2” Wand Tube OD)
- ASSIST HANDLE GRIP
- INLINE SPRAYER HANDLE GRIP
New Grips made from durable cast rubber. Choose yours from any of these popular colors: red, black, lime green, light gray or blue.
Consider matching your Grip colors so they all work together – Backhand and Assist Handle Grips, your Supply Line and your Wand Head.
WAND BACKHAND GRIP
Preparation is key to installing this grip. You will need a small tube of Liquid Nails™ (tan colored, solvent cleanup variety, not the white colored variety) and a trigger bottle of warm water. You will also need several paper towels. Now you are ready to install: Apply a generous film of the Liquid Nails™ to both surfaces (outside of wand tube and inside of rubber sleeve). Use your index finger to spread the Liquid Nails around like it was peanut butter. Next, mist the outside of wand tube and inside of wand sleeve lightly with the warm water or window cleaning solution. Then slide the sleeve into position. Work fast to position the sleeve because the Liquid Nails starts hardening fast.
Cleanup with generous amounts of WD-40™ and paper towels. Done.
ASSIST HANDLE GRIP
To install: First, disassemble the Assist Handle by unscrewing the long bolt running through the pvc tube. Pry off the old sleeve from the pvc tube then slide on the new Grip; no glue needed, but ok if you want it. Reassemble the Handle by running the long bolt back through the pvc tubing and tighten the nut. Done.
INJECTION SPRAYER HANDLE GRIP
To install: drizzle generous amounts of Cool Cuff Lube down inside both ends of the rubber Sleeve and a few more drips onto the outside of the metal tube of your handle assembly. This new grip fits very tightly so be generous with the oil. Press the Sleeve onto the metal tube until the threads are slightly visible at each end. Reassemble your sprayer Handle Assembly. Done.
WANDERS’ GRIP CLEANER: Designed to make fast work of cleaning your Grips. Works great on all plastic and rubber parts). Just mist & wipe with a paper towel to keep them looking new.